About the product

Reaction time: 2-10 min.

GREDORS CM — specialized detergent for cleaning and complete degreasing of metal surfaces before painting. The concentrated composition includes corrosion inhibitors, complexing agents, surfactants and softeners. The special GREDORS CM compound quickly removes industrial oils, soot, dirt, preservative lubricants, oil product stains and operational contamination. Compliance with the characteristics of the minimum hazard class (4th) eliminates the risk of irritation of the respiratory tract, mucous membranes and skin of the hands.

Purpose

GREDORS CM can be used for preparing metal surfaces of enclosing structures, industrial machinery and process equipment for painting.
The concentrated composition is optimal for surface treatment of internal combustion engines, industrial machines and process units. Biodegradable GREDORS CM-a fire-safe compound that does not emit toxic substances, can be used without restrictions.

Application method

Manual cleaning: the concentrate is diluted with water at the rate of 10-30 g / l (1-3% of the volume) and applied to the surface with a rag, brush, sponge, or spray method. The product is kept on the surface for 2-10 minutes, cleaned using the above methods, washed off with clean water. The solution consumption is 100-300 ml / sq. m. it is possible to increase the concentration of 30-200 g / l (for complex contamination).

Machine wash (workwear): 20-50 g is used for 10 liters (accelerated washing mode) at a temperature not higher than 40-45 °C. At elevated temperatures, the material foams, which can lead to damage to the washing machine. After any cleaning method, the products must be washed in clean water.

Precautionary measures

During operation, use standard protective equipment that eliminates the risk of contact of the transmitter with the eyes, respiratory organs and skin of the hands. In case of skin contact or eye contact, rinse with water. Consult a doctor if necessary.

Shelf life

12 months from the date of manufacture. The material must be stored in a sealed container at a temperature of +1 to +40 °C in a dry room. While maintaining quality indicators, the composition can be used for a longer shelf life.

Packing

About the product

Reaction time: 2 – 10 min.

GREDORS CM-E is a specialized cleaner for particularly complex dirt, designed for effective treatment of smooth and raised metal surfaces. The concentrated composition, which includes corrosion inhibitors, complexing agents, surfactants, alkalis and softeners, has excellent cleaning properties and effective degreasing characteristics. GREDORS CM-E can be used to remove preservative lubricants, industrial oils, oil and fat stains, soot, dirt, residues of cooling lubricants, as well as all kinds of lubricants based on fuel oil, bitumen and graphite.

Purpose

GREDORS CM-E is used for cleaning power units, industrial machinery, external surfaces of internal combustion engines, metal structures and surfaces of any configuration. The special composition is optimal for processing polymer materials that are resistant to alkali. Compliance with the characteristics of the minimum hazard class (4th) eliminates the risk of irritation of the respiratory tract, mucous membranes and skin of the hands.

Application method

The performance of the solution is provided at a temperature of +15°C and the maximum permissible application temperature of +70 °C. Effective application temperature from +45 to 55 °C.

Manual cleaning: the concentrate is diluted with water at the rate of 10-30 g / l (1-3% of the volume) and applied to the surface with a rag, brush, sponge, or spray method. The product is kept on the surface for 2-10 minutes, cleaned using the above methods, washed off with clean water. The solution consumption is 100-300 ml / 1 square meter. It is possible to increase the concentration of 30-150 g / l (for complex contamination).

Washing machines and high-pressure devices: 10-30 g / l of water (1-3%). It is possible to increase the concentration of 30-150 g / l (for complex contamination). The working solution is applied to the surface, maintained without drying and washed off with water.

Precautionary measures

During operation, use standard protective equipment that eliminates the risk of contact of the transmitter with the eyes, respiratory organs and skin of the hands. In case of skin contact or eye contact, rinse with water. Consult a doctor if necessary.

Shelf life

12 months from the date of manufacture. The material must be stored in a sealed container at a temperature of +1 to +40 °C in a dry room. While maintaining quality indicators, the composition can be used for a longer shelf life.

Packing

About the product

Reaction time: 2-10 minutes

GREDORS CM-P is a combined cleaning agent that provides cleaning of paint and varnish coatings, as well as amorphous phosphating of steel and aluminum surfaces. The liquid composition based on orthophosphoric acid is optimized for effective removal of corrosion products and various operational contaminants. The formation of an amorphous zinc-phosphate layer on the surface of the processed materials has a positive effect on the strength of the applied coatings.

Purpose

GREDORS CM-P is used for cleaning and simultaneous phosphating of various metal products, parts, aggregates and industrial mechanisms. The water-soluble composition is fire-safe, chemically stable in air and water. Retains characteristics when exposed to negative temperatures (does not freeze). It is allowed to be disposed of in a normal sewer with the use of a metal mesh that traps sludge particles. GREDORS CM-P is water-soluble, biodegradable, explosion-and fire-proof.

Application method

Cleaning and phosphating of steel surfaces: Prepare a 2-5% solution concentrate. Operating temperature of 30-60 °C. pH 3.8 to a 4.3. Processing time 2-5 min. After cleaning, wash the product in clean water and dry it.

Cleaning and phosphating of aluminum alloy surfaces: Prepare a 2-5% solution concentrate. Operating temperature of 30-60 °C. pH 3.8 to a 4.3. Processing time 2-5 min.

Acid cleaning and metal degreasing: Prepare a 2-5% solution concentrate. Operating temperature of 25-60 °C. a pH of 1.5-2.0. Processing time 2-5 min. After cleaning, wash the product in clean water and dry it.

Precautionary measures

During operation, use standard protective equipment that eliminates the risk of contact of the transmitter with the eyes, respiratory organs and skin of the hands. In case of skin contact or eye contact, rinse with water. Consult a doctor if necessary.

Shelf life

24 months from the date of manufacture. The material must be stored in a sealed container at a temperature of +1 to +30 °C in a dry room. While maintaining quality indicators, the composition can be used for a longer shelf life.

Packing

About the product

Reaction time: up to 30 min

GREDORS CM-P is a combined cleaning agent that provides cleaning of paint and varnish coatings, as well as amorphous phosphating of steel and aluminum surfaces. The liquid composition based on orthophosphoric acid is optimized for effective removal of corrosion products and various operational contaminants. The formation of an amorphous zinc-phosphate layer on the surface of the processed materials has a positive effect on the strength of the applied coatings.

Purpose

GREDORS CM-P is used for cleaning and simultaneous phosphating of various metal products, parts, aggregates and industrial mechanisms. The water-soluble composition is fire-safe, chemically stable in air and water. Retains characteristics when exposed to negative temperatures (does not freeze). It is allowed to be disposed of in a normal sewer with the use of a metal mesh that traps sludge particles. GREDORS CM-P is water-soluble, biodegradable, explosion-and fire-proof.

Application method

Before use, GREDORS CM is diluted with water.

Cleaning and phosphating of steel surfaces: Prepare a 2-5% solution concentrate. Operating temperature of 30-60 °C. pH 3.8 to a 4.3. Processing time 2-5 min. After cleaning, wash the product in clean water and dry it.

Cleaning and phosphating of aluminum alloy surfaces: Prepare a 2-5% solution concentrate. Operating temperature of 30-60 °C. pH 3.8 to a 4.3. Processing time 2-5 min.

Acid cleaning and metal degreasing: Prepare a 2-5% solution concentrate. Operating temperature of 25-60 °C. a pH of 1.5-2.0. Processing time 2-5 min. After cleaning, wash the product in clean water and dry it.

Precautionary measures

During operation, use standard protective equipment that eliminates the risk of contact of the transmitter with the eyes, respiratory organs and skin of the hands. In case of skin contact or eye contact, rinse with water. Consult a doctor if necessary.

Shelf life

24 months from the date of manufacture. The material must be stored in a sealed container at a temperature of +1 to +30 °C in a dry room. While maintaining quality indicators, the composition can be used for a longer shelf life.

Packing

About the product

Reaction time: up to 10 min

GREDORS CM-SA is a specialized product for effective removal of high-strength shock-resistant coatings from smooth and embossed metal surfaces. A highly effective compound with an increased concentration of methane chloride contains corrosion inhibitors, a mixture of solvents, complexing agents and a thickener. GREDORS CM-SA can be used for cleaning metal parts and structures from the most common types of paint coatings: epoxy, nitrocellulose, alkyd, epoxypolyester, polyurethane, polyester, polyacrylate, powder and vinyl chloride. GREDORS CM-SA is delivered as a paste-like viscous mass with thixotropic characteristics, ready for immediate use. The special formula ensures stable efficiency of the composition with significant temperature drops. The absence of a sharp smell and aggressive toxic secretions allows you to use the composition for completely safe and comfortable work in closed rooms.

Purpose

GREDORS CM-SA is designed for effective cleaning of industrial and construction metal structures from all types of high-strength coatings before new painting. A special composition that protects against corrosion can be used to clean the car body before protective treatment and painting.

Application method

Clean the surface from dust and dirt, oil, and dry. If there are traces of contamination on the surface, it should be cleaned using water, technical detergent or a solvent. The recommended application temperature of the wash is from +8 to +25 °C. It is possible to apply the composition by filling, roller, brush, airless spray device or immersion. The applied composition is kept in an even layer until the appearance of swelling and noticeable cracking of the paint layer. The washout reaction takes up to 10 minutes. The softened coating can be easily removed with a spatula, scraper or high-pressure device. Areas with partially remaining coverage can be re-treated. After performing operations, the surface must be washed with water, technical detergent, or an appropriate solvent. Do not allow the composition to dry on the surface! The time spent on the surface of the product should not be more than 1.5 hours.

Precautionary measures

During operation, use standard protective equipment that eliminates the risk of contact of the transmitter with the eyes, respiratory organs and skin of the hands. In case of skin contact or eye contact, rinse with water. Consult a doctor if necessary.

Shelf life

During operation, use standard protective equipment that eliminates the risk of contact of the transmitter with the eyes, respiratory organs and skin of the hands. In case of skin contact or eye contact, rinse with water. Consult a doctor if necessary. The material belongs to hazard class 3 (highly flammable liquids).

Packing

About the product

Reaction time: 1-5 min.

GREDORS FC is an effective solution for removing efflorescences from the facade surface. Leaves no residue after drying. The product belongs to the category of water impregnations used for processing bricks and concrete surfaces. Facade cleaner is an aqueous solution that includes acid salts, a number of special additives and antiseptic ingredients. GREDORS FC is used for cleaning brick, stone and concrete facades of various structures. The product is used for working with various facing materials, quickly eliminating efflorescences, lime and salt deposits. The product quickly copes with facing dirt that appears during the migration of salts after precipitation dries. The drug provides deep penetration by dissolving salt and lime deposits with surfactants and acids. After treatment, the product increases the surface’s resistance to precipitation.

Purpose

Gredors FC facade cleaner is used for processing mineral surfaces, facades of structures and fences, walls of public and residential buildings, concrete, stone, brickwork, ceramic and plastered surfaces. GREDORS FC also removes the remains of dry gypsum and lime-based building mixes.

Application method

GREDORS FC is supplied as a concentrate. Depending on the degree of surface contamination, the composition is diluted with water in a ratio of 1:10-1:3. In case of particularly strong contamination or negative temperature, the composition can be diluted in a ratio of 1: 2, or used in a concentrated form. The product is applied using: a sponge, brush, roller, paint brush, spray installation (spray gun). Apply the product to the surface to be treated, keep for 1-5 minutes, then remove by mechanical means or water under pressure.

Precautionary measures

During operation, use standard protective equipment that eliminates the risk of contact of the transmitter with the eyes, respiratory organs and skin of the hands. In case of skin contact or eye contact, rinse with water. Consult a doctor if necessary.

Shelf life

12 months from the date of manufacture. The material must be stored in a sealed container at a temperature above 0 °C. Keep away from children.

Packing

About the product

GREDORS IC is used for temporary preservation of metal steel and cast iron surfaces. This composition effectively prevents atmospheric corrosion of metal products. The composition is a homogeneous transparent liquid with a yellow tint. GREDORS IC is used to supplement working fluids with anti-corrosion characteristics. The product is used in conjunction with: industrial water, water-dispersion coatings, technical means for cleaning (TMS), cooling lubricants (coolant). Metal preservation GREDORS IC is used for inter-operational finishing, transportation and temporary storage of metal products. This protection remains effective for up to 30 days. This condition is relevant when storing steel parts under a canopy, with a humidity of 100% and an air temperature of up to +40 °C. GREDORS IC is highly soluble in water at room temperature. The spent preservation layer does not need to be removed before performing subsequent mechanical work. GREDORS IC corrosion inhibitor does not emit toxic impurities, it is biodegradable and stable in various environments.

Purpose

Gredors IC preservative is used in metalworking, utilities, construction and repair industry. The composition is indispensable in the heat and power industry and mechanical engineering. GREDORS IC is used for safe seasonal storage of vehicles, special equipment and accessories. Such conservation is successfully combined with both water systems and organic solvents. Before starting decorative metal finishing, the protective film of the preservative can be removed with warm water or a non-toxic solvent if necessary.

Application method

Application temperature: from +5 to +70 °C (for an aqueous solution). Processed products must be stored in a warehouse or under a shed (on the street).
To preserve metal structures, it is necessary to prepare a working solution. Dilute 5-20% of the composition in water, depending on the planned protection time and storage conditions. Processing is performed by dipping in an aqueous solution, spraying on the surface or using a brush.
For the production of water-dispersion coatings, 2% inhibitor is added to the water. 0.5% of the inhibitor is added to the working solutions of TMS and coolant, or 2-5% to the concentrate of coolant or TMS.

Precautionary measures

During operation, use standard protective equipment that eliminates the risk of contact of the transmitter with the eyes, respiratory organs and skin of the hands. In case of skin contact or eye contact, rinse with water. Consult a doctor if necessary.

Shelf life

In the original packaging — 4 years from the date of manufacture. Store in a hermetically sealed container at a temperature of +1 to +30 ° C.

Packing

About the product

GREDORS IC-O is used for preserving metal products. This preservative oil provides long-term protection of the metal from atmospheric effects. The inhibitory composition of GREDORS IC-O prevents corrosion of various metals, ferrous and non-ferrous (zinc, steel, tinned iron, cast iron). It is made on the basis of a solvent, with a flash point of 80 °C. Inhibitor oil is successfully used for preservation: with metals and structures made of carbon steel and supplemented with an oxide or phosphate layer. GREDOS IC-O is used for anti-corrosion treatment of machinery, components, metal products and parts that need reliable seasonal storage and safe transportation.

Purpose

Scope of application: organization of long-term storage or atmospheric storage, transportation of metal products over long distances, protection of industrial plant equipment from corrosion during prolonged downtime, preservation of vehicles for the winter period-with the help of GREDORS IC-O, the main parts, mechanisms and components that are most prone to corrosion. When applying GREDORS IC-O oil, a reliable protective layer is created on the surface of the product, which prevents contact with moisture and further development of corrosion. The oily anti-corrosion compound forms a transparent brown color. The coating has high hydrophobic water-repellent properties, so re-treatment will be required no earlier than in 5 years. GREDORS IC-O is widely used in the following areas: mechanical engineering, metalworking industry, utilities, heat and power, repair work of various complexity, in everyday life.

Application method

Clean the surface from dust, dirt, and oil. The treatment can be performed by dipping, brushing, or spraying. White Spirit or Nephras can be used for dilution to the working viscosity. At the end of the work and during their conduct, it is necessary to thoroughly ventilate the room. Application temperature range: from +5 to +50 °C. Processed products must be stored in a warehouse or under a shed (on the street).

Precautionary measures

During operation, use standard protective equipment that eliminates the risk of contact of the transmitter with the eyes, respiratory organs and skin of the hands. In case of skin contact or eye contact, rinse with water. Consult a doctor if necessary.

Shelf life

In the original packaging — 4 years from the date of manufacture. Store in a hermetically sealed container at a temperature of +1 to +30 ° C.

Packing

About the product

GREDORS IC-P is a passivating agent that is used to temporarily protect steel from atmospheric corrosion. The composition includes a concentrated water-alkaline emulsion that provides a powerful anti-corrosion effect. It allows to delay the passivation of metal structures, forming an invisible film on the surface. GREDORS IC-P is used in the course of interoperative processing, transportation and storage of metal structures for various purposes. It can be used to protect steel products within 5 days. The composition is effective when mixed with water of any hardness. This passivating compound is characterized by the following properties: biodegradability, absence of toxic, explosive and fire — hazardous components, high passivating properties, chemical stability in water and in the open air, no unpleasant smell, the possibility of defrosting with the preservation of physical and chemical characteristics and precipitation. GREDORS IC-P belongs to the 4th (minimum) hazard class. The product does not irritate the skin, lungs and mucous membranes. It contains no toxic solvent. The waste solution can be disposed of without consequences using the sewer system.

Purpose

GREDORS IC-P is used in the heat and power industry, metalworking, and mechanical engineering. This passivating composition is used in repair and transport bases, as well as on the territory of public utilities. To create a working solution, use washing water. Direct processing is carried out in several ways: by immersion in a container, manually, by jet, and by circulation. After processing, the metal surface needs to be dried. During work, you need to use a respirator and protective clothing.

Application method

During operation, use standard protective equipment that eliminates the risk of contact of the transmitter with the eyes, respiratory organs and skin of the hands. In case of skin contact or eye contact, rinse with water. Consult a doctor if necessary.

Precautionary measures

During operation, use standard protective equipment that eliminates the risk of contact of the transmitter with the eyes, respiratory organs and skin of the hands. In case of skin contact or eye contact, rinse with water. Consult a doctor if necessary.

Shelf life

12 months from the date of manufacture. The material must be stored in a sealed container, protected from sunlight and heat, at a temperature of +1 to +40 °C in a dry room. While maintaining quality indicators, the composition can be used for a longer shelf life.

Packing

About the product

GREDORS IC-V protects ferrous and non-ferrous metals from corrosion damage. At normal temperature, GREDORS IC-V evaporates, reaches the metal as vapors, is adsorbed on the surface, and prevents corrosion by intense interaction. The high diffusion capacity of the vapor protection provides an effective effect on gaps and crevices that are inaccessible to other types of inhibitors. The simplicity and cost-effectiveness allows you to use GREDORS IC-V when it is necessary to process sealed containers.

Purpose

GREDORS IC-V is used for complete preservation of large tanks, process tanks, specialized storage tanks for water, food products and various petroleum products. It can be used to protect cooling systems, power equipment, electrical equipment, electrical appliances, parts of complex configuration and components of air conditioning systems.

Application method

The methods of using the product depend on the specific task. Conservation is reduced to the introduction of GREDORS IC-V into the packaging (the packing norms are taken into account), de-preservation-the barrier material is extracted.
Method of preserving metal products for transportation or storage:
The metal product is placed in a box, a sealed container or a cover made of polymer film. The package contains the required amount of volatile inhibitor (50-180 g / 1 sq. m) and an inhibitor in the form of silica gel (450-600 g / 1 cubic meter). Depending on the type of packaging — the polymer cover is welded, the box or container is tightly closed.

Precautionary measures

During operation, use standard protective equipment that eliminates the risk of contact of the transmitter with the eyes, respiratory organs and skin of the hands. In case of skin contact or eye contact, rinse with water. Consult a doctor if necessary.

Shelf life

5 years from the date of manufacture. The material must be stored in a sealed container, protected from sunlight and heat.

Packing

About the product

GREDORS IC-W is used for effective protection of non-ferrous and ferrous metal structures from corrosion. The inhibitor is effective in both water and water-glycol environments. In such conditions, metal surfaces need special protection from the destructive effects of rust. GREDORS IC-W, among other things, has a number of additional properties, for example, it suppresses the growth of microorganisms on the inner surface of metal structures. The inhibitor is effective for preserving large-sized equipment, providing a long-lasting protective effect for up to 6 months. GREDORS IC-W provides the proper level of protection regardless of the operational status of the metal structure, eliminating the appearance of rust both in working condition and during equipment downtime. The composition can be effectively combined with non-freezing liquids. The GREDORS IC-W working solution demonstrates reliable operation at ambient temperatures from -40 to +100 ° C.

Purpose

The composition is effective mainly in heating and air-conditioning installations built on the water-glycol principle. GREDORS IC-W is also used for water cooling modules. The solution does not change its properties in a liquid with varying degrees of hardness. In addition to the direct prevention of rust in functioning air conditioning, cooling and heating systems, THE gredors IC-W metal inhibitor is used for the preservation of various containers, idle shut-off valves, and pumping stations.

Application method

The use of GREDORS IC-W depends on the specific tasks. The working concentration is 0.5-1.0%. It is usually introduced into a new heat carrier or into a previously used one after preliminary reagent cleaning of the system from organic and mineral deposits, as well as corrosion products by means of GREDORS IC-W.

Precautionary measures

During operation, use standard protective equipment that eliminates the risk of contact of the transmitter with the eyes, respiratory organs and skin of the hands. In case of skin contact or eye contact, rinse with water. Consult a doctor if necessary.

Shelf life

2 years from the date of manufacture. Store in a hermetically sealed container at a temperature of +1 to +30 ° C.

Packing

About the product

GREDORS R is an acid-free rust converter designed to modify corrosion damage on the surface of ferrous metal products. The composition of vegetable tannins, functional additives, corrosion inhibitors and stabilizers is optimal for processing steel pipes, rolled products and structural elements. Special composition: replaces the mechanical cleaning method, has high adhesion to metal surfaces, increases the service life of reinforced concrete and steel reinforcement, is convenient and safe to use. GREDORS R is used to eliminate corrosion damage from various classes of reinforcement products: A-I, A-II, A-III, A-IV. The use of specialized additives provides a complete transformation of the rust layer up to 150 microns thick. The converter is able to protect metal products for 18 days (without precipitation) at the inter-operational stage of the production cycle.

Purpose

GREDORS R is actively used in the production of concrete products, in the construction of metal structures and reinforced concrete structures. The material is optimized for use in preparation for painting operations, and can also be used in domestic conditions and industry. The rust converter, which increases the service life of parts, is in demand when repairing technological mechanisms and industrial machines. When using the composition, iron oxide is transformed into corrosion-neutral compounds. After the process is completed in neutral environments, the parts do not need to be washed with water.

Application method

Thoroughly mixed composition is applied to clean surfaces free of dust, moisture, oil and flaking fragments. The converter can be applied by roller, brush, immersion, or spray. Depending on the thickness of the lesion, the surface is treated 1-4 times until the rust is completely blackened. When the reaction is successful, the color changes from red to brown or black, depending on the type of metal. When re-applied, the surface is repeatedly treated at intervals of 15 minutes until the rust is completely eliminated. Application temperature: not less than +4 °C. Before finishing (applying paint or concreting), the surface must be dried (1-3 hours, depending on the ambient temperature).

Precautionary measures

12 months from the date of manufacture. The composition must be stored in the factory container, closed at a temperature from 0 to +30 °C.

Shelf life

6 months from the date of manufacture. The composition must be stored in a hermetically sealed container without access to sunlight and heat, away from food. Maximum permissible air temperature: +35 °C. Keep away from children.

Packing

About the product

GREDORS MD-P concentrate is used for degreasing and phosphating metal surfaces (steel and aluminum). The composition is used for processing steel and aluminum before finishing with paint materials. GREDORS MD-P is also used before powder coating to improve the adhesion parameters. The solution is a liquid concentrate that includes mineral salts, activating additives, and surfactants. GREDORS MD-P is classified as a hazard class 4 (low-hazard substance). The product is stable in water and in the air. It does not emit toxic substances.

Purpose

GREDORS MD-P is used before cleaning metals by the following methods: in immersion baths, under pressure, manually. The solution forms an iron-phosphate film on the surface. It increases the adhesion of the paint to the metal.

Application method

The surfaces to be treated must be prepared by first cleaning them from rust, dirt, oil, dust, and petroleum products. Depending on the type of contamination on the surface, it is necessary to clean the surface with water, technical detergent or solvent. Mix the product thoroughly before use. the pH of the product is in the range of 3.5-4.3. GREDORS MD-P has degreasing properties, but in the presence of heavy oil contamination, they must be removed with a rag, additionally degreased. Dried products, depending on the brand of metal, have the following appearance: from gray-sand to rainbow on steel, and gray-yellowish on aluminum alloys. Concentrate consumption is 10-30 g / sq. m, depending on the application and the amount of contamination. After treatment, rinse with water. Dry with warm air.

Precautionary measures

When working, use standard protective equipment that eliminates the risk of contact with the eyes, respiratory organs and skin of the hands. In case of skin contact or eye contact, rinse with water. Consult a doctor if necessary.

Shelf life

6 months from the date of manufacture. The material must be stored in a sealed container at a temperature above 0 °C. Keep away from children.

Packing

About the product

Reaction time: 3-15 min.

GREDORS PR is a fast-acting universal wash that is optimized for removing old paint coatings from any substrate. A special composition of corrosion inhibitors, solvents, complexing agent and thickener ensures the removal of all types of paints: alkyd, oil, bituminous, pentaphthalic, epoxy, acrylate, latex, polyurethane, petroleum polymer, glyptal, perchlorovinyl, melaminoalkid, melamine formaldehyde, urea formaldehyde. Universal composition can be used indoors and outdoors with a significant decrease in atmospheric temperature. The absence of corrosion activity significantly expands the scope of the material.

Purpose

GREDORS PR is used for cleaning walls, floors, ceilings, wood, metal and polymer structures. The use of the composition provides a complete cleaning of surfaces from putties and primers.

Application method

The surfaces to be treated must be prepared by first cleaning them from rust, dirt, oil, dust, and petroleum products. Depending on the type of contamination on the surface, it is necessary to clean the surface with water, technical detergent or solvent. Mix the product thoroughly before use. the pH of the product is in the range of 3.5-4.3. GREDORS MD-P has degreasing properties, but in the presence of heavy oil contamination, they must be removed with a rag, additionally degreased. Dried products, depending on the brand of metal, have the following appearance: from gray-sand to rainbow on steel, and gray-yellowish on aluminum alloys. Concentrate consumption is 10-30 g / sq. m, depending on the application and the amount of contamination.

Precautionary measures

At the end of work and during their implementation, it is necessary to thoroughly ventilate the room. In case of skin contact or eye contact, rinse with water. Consult a doctor if necessary. The material belongs to hazard class 3 (highly flammable liquids).

Shelf life

6 months from the date of manufacture. The composition must be stored in a hermetically sealed container without access to sunlight and heat, away from food. Maximum permissible air temperature: +35 °C. Keep away from children.

Packing

About the product

Reaction time: up to 30 min.

GREDORS PR-CW is used as a highly effective product for removing old paint and other coatings from the surface of car wheels. Motorists use it independently during repair activities. GREDORS PR-CW is actively used in service centers, tire repair and paint shops. Removing the previous dye from car rims increases its service life. The GREDORS PR-CW treatment of the disc eliminates the risk of corrosion that can occur on untreated metal surfaces. The solution is characterized by excellent thixotropic parameters. GREDORS PR-CW consists of a number of solvents, complexing agents, thickeners and inhibitory components. The product belongs to the 3rd class of danger. It is easy to remove it from the surface using ordinary water, solvent or technical cleaner. It is a highly flammable liquid. pH=1.7

Purpose

GREDORS PR-CW acid solution instantly removes old paint from the wheels. This product does not damage the disk surface, effectively removing any finishing layer. The solution interacts with ferrous and non-ferrous metals without consequences. When processing aluminum-magnesium alloys, you can observe a slight gray coating, which is easy to remove with a cloth or rag.

Application method

The surfaces to be treated must be prepared and pre-cleaned of dirt, oil, dust, and petroleum products. Depending on the type of contamination on the surface, it is necessary to clean the surface with water, technical detergent or solvent. At the end of the work, the surface must be washed with water, technical means, or organic solvent. Do not allow the wash to dry on the surface! The time spent on the surface of the wash should not be more than 1.5 hours.
Application using a roller, brush, filling method: Apply an even layer and hold on the surface until the old coating swells for 10-30 minutes. If there are areas with coating residues, it is necessary to undergo additional treatment with a wash. The softened coating can be easily removed with a spatula, scraper or high-pressure device.
Application by immersion: the product is poured into a special bath followed by immersion of the product. It is recommended to ensure gas tightness of the bath. The reaction time is 10-30 minutes, depending on the coating strength, grade, or percentage of metal powder filling. The softened coating can be easily removed with a spatula, scraper or high-pressure device.
Airless application: the airless application device must be designed for the application of washes. The wash is applied to the surface with a jet. Reaction time up to 30 min. The softened coating can be easily removed with a spatula, scraper or high-pressure device.

Precautionary measures

At the end of work and during their implementation, it is necessary to thoroughly ventilate the room. In case of skin contact or eye contact, rinse with water. Consult a doctor if necessary. The material belongs to hazard class 3 (highly flammable liquids).

Shelf life

6 months from the date of manufacture. The composition must be stored in a hermetically sealed container without access to sunlight and heat, away from food. Maximum permissible air temperature: +35 °C. Keep away from children. While maintaining quality indicators, it can be used for a longer shelf life.

Packing

About the product

Reaction time: 0.1-8 min.

GREDORS PR-E is a practical productl for quick removing paint coatings from metal surfaces. A special mixture of solvents, thickener, corrosion inhibitors and complexing agents provides effective removal of various coatings: alkyd, epoxy, nitrocellulose, epoxypolyester, polyurethane, polyester, powder, polyacrylate and vinyl chloride.

Purpose

GREDORS PR-E can be used in industrial and domestic conditions when preparing surfaces for applying new protective or decorative coatings. The chemically active composition ensures complete removal of stable and damaged coatings from parts, housings and enclosing structures. The technical characteristics of the special product eliminate the need for mechanical treatment of surfaces with intensive release of dust and potentially dangerous contaminants.

Application method

The surfaces to be treated must first be cleaned of dirt, oil, dust, and petroleum products. Depending on the type of contamination on the surface, it is necessary to clean the surface with water, technical detergent or solvent. It is possible to apply the composition by filling, roller, brush, airless spray device or immersion. The applied composition is maintained until the appearance of swelling and noticeable cracking of the paint layer. The washout reaction time is 0.1-8 minutes. The softened coating can be easily removed with a spatula, scraper or high-pressure device. Areas with remaining coverage can be re-treated. Do not allow the wash to dry on the surface! The time spent on the surface of the wash should not be more than 1.5 hours.

Precautionary measures

At the end of work and during their implementation, it is necessary to thoroughly ventilate the room. In case of skin contact or eye contact, rinse with water. Consult a doctor if necessary. The material belongs to hazard class 3 (highly flammable liquids).

Shelf life

12 months from the date of manufacture. The composition must be stored in a hermetically sealed container without access to sunlight and heat, away from food. Maximum permissible air temperature: +35 °C. Keep away from children.

Packing

About the product

Reaction time: 3-15 min.

GREDORS PR-F is a universal product for removing facade paint coatings. A special mixture of corrosion inhibitors, solvents, complexing agents and thickener is effective on horizontal, inclined and vertical surfaces. It is allowed to dilute with water to increase the volume by 10-20%.

Purpose

Gredors PR-F paste, which has thixotropic characteristics, is designed for removing paint from vertical facade surfaces and various reinforced concrete structures. A special wash prevents the spread of corrosion. The universal composition is optimized for removing facade paints (including graffiti and marker inscriptions).

Application method

The surfaces to be treated must be prepared and pre-cleaned of dirt, oil, dust, and petroleum products. Depending on the type of contamination on the surface, it is necessary to clean the surface with water, technical detergent or solvent. The recommended application temperature of the wash is from +8 to +25 °C. At low temperatures, the reaction time may increase. It is possible to apply the composition by filling, roller, brush, airless spray device or immersion. When submerged, the wash is poured into a special container, and then the product is submerged. The applied composition is kept in an even layer until the appearance of swelling and noticeable cracking of the paint layer. The washout reaction time is 3-15 minutes. The softened coating can be easily removed with a spatula, scraper or high-pressure device. Areas with remaining coverage can be re-treated. Do not allow the wash to dry on the surface! The time spent on the surface of the wash should not be more than 2.5 hours.

Precautionary measures

At the end of work and during their implementation, it is necessary to thoroughly ventilate the room. In case of skin contact or eye contact, rinse with water. Consult a doctor if necessary. The material belongs to hazard class 3 (highly flammable liquids).

Shelf life

6 months from the date of manufacture. The composition must be stored in a hermetically sealed container without access to sunlight and heat, away from food. Maximum permissible air temperature: +35 °C. Keep away from children.

Packing

About the product

Reaction time: 3-15 min.

GREDORS PR-P is an effective product for rapid removal of powder coatings from ferrous and non-ferrous metal surfaces. The special solution contains corrosion inhibitors, a mixture of solvents, complexing agents and thickener. Thixotropic properties of the paste-like composition provide convenient processing of vertical surfaces.

Purpose

GREDORS PR-P is used for cleaning metal surfaces from decorative coatings developed on the basis of epoxypolyester, epoxy, polyester, polyurethane and polyacrylate powder paints. To reduce the viscosity, add 10-20% isopropyl alcohol. It is possible to apply the composition using an airless spray device.

Application method

The surfaces to be treated must first be cleaned of dirt, oil, dust, and petroleum products. Depending on the type of contamination on the surface, it is necessary to clean the surface with water, technical detergent or solvent. It is possible to apply the composition by filling, roller, brush, airless spray device or immersion. When submerged, the wash is poured into a special container, and then the product is submerged. The applied composition is kept in an even layer until the appearance of swelling and noticeable cracking of the paint layer. The washout reaction time is 3-15 minutes. The softened coating can be easily removed with a spatula, scraper or high-pressure device. Areas with remaining coverage can be re-treated. Do not allow the wash to dry on the surface! The time spent on the surface of the wash should not be more than 2.5 hours.

Precautionary measures

At the end of work and during their implementation, it is necessary to thoroughly ventilate the room. In case of skin contact or eye contact, rinse with water. Consult a doctor if necessary. The material belongs to hazard class 3 (highly flammable liquids).

Shelf life

6 months from the date of manufacture. The composition must be stored in a hermetically sealed container without access to sunlight and heat, away from food. Maximum permissible air temperature: +35 °C. Keep away from children.

Packing

1. General provisions
This personal data processing policy is drawn up in accordance with the requirements of Federal law No. 152-FZ of 27.07.2006 «On personal data» and defines the procedure for processing personal data and measures to ensure the security of personal data of Ivan Sergeevich Mikhailov (hereinafter referred to as the Operator). The operator sets its most important goal and condition for the implementation of its activities to respect the rights and freedoms of individuals and citizens when processing their personal data, including the protection of the rights to privacy, personal and family secrets. This Operator’s personal data processing policy (hereinafter referred to as the Policy) applies to all information that the Operator can obtain about website visitors http://gredors.com.

2. Basic concepts used in the Policy
Automated processing of personal data – processing of personal data using computer technology;
Blocking of personal data – temporary termination of processing of personal data (except for cases when processing is necessary to clarify personal data);
Website – a set of graphic and informational materials, as well as computer programs and databases that ensure their availability on the Internet at a network address http://gredors.com;
Personal data information system — a set of personal data contained in databases, and information technologies and technical means that ensure their processing;
Depersonalization of personal data — actions that make it impossible to determine whether personal data belongs to a specific User or other personal data subject without using additional information;
Processing of personal data – any action (operation) or a set of actions (operations) performed with or without the use of automation tools with personal data, including collection, recording, systematization, accumulation, storage, clarification (updating, modification), extraction, use, transfer (distribution, provision, access), depersonalization, blocking, deletion, destruction of personal data;
Operator – a state body, municipal body, legal entity or individual that independently or jointly with other persons organizes and (or) performs the processing of personal data, as well as determines the purposes of processing personal data, the composition of personal data to be processed, actions (operations) performed with personal data;
Personal data – any information related directly or indirectly to a specific or identifiable User of the website http://gredors.com;
User – any user of the website http://gredors.com;
Provision of personal data – actions aimed at disclosure of personal data to a certain person or a certain group of persons;
Distribution of personal data – any actions aimed at disclosure of personal data to an indefinite circle of persons (transfer of personal data) or at familiarization with personal data to an unlimited circle of persons, including disclosure of personal data in the mass media, placement in information and telecommunications networks, or providing access to personal data in any other way;
Cross-border transfer of personal data – transfer of personal data to the territory of a foreign state to the authority of a foreign state, a foreign individual or a foreign legal entity;
Destruction of personal data – any action in which personal data is destroyed irrevocably impossible to restore the contents of personal data in the information system of personal data and (or) which are destroyed material carriers of personal data.

3. the Operator may process the following personal data of the User
Last name, first name, patronymic;
Phone number;
Email address;
Also on the website, the collection and processing of anonymous data about visitors (including «cookies») through the services of Internet statistics (Yandex Metric and Google Analytics and others).
The above-mentioned data is further United by the General concept of Personal data in the text of the Policy.

4. Purposes of personal data processing
The purpose of processing the User’s personal data is to conclude, execute and terminate civil contracts; to provide the User with access to the services, information and / or materials contained on the website https://mysite.ru; clarification of order details. The Operator also has the right to send notifications to the User about new products and services, special offers and various events. The user can always refuse to receive informational messages by sending an email to the Operator policy@mysite.ru marked «Opt-out of notifications about new products and services and special offers». Depersonalized User data collected using Internet statistics services is used to collect information about User actions on the site, improve the quality of the site and its content.

5. Legal grounds for processing personal data
The operator processes the User’s personal data only if they are filled in and / or sent by the User independently through special forms located on the site http://gredors.com. By filling out the appropriate forms and / or sending their personal data to the Operator, the User agrees to this Policy. The operator processes depersonalized data about the User if this is allowed in the User’s browser settings (saving cookies and using JavaScript technology is enabled).

6. Procedure for collecting, storing, transmitting and other types of personal data processing
The security of personal data processed by the Operator is ensured by implementing legal, organizational and technical measures necessary to fully comply with the requirements of current legislation in the field of personal data protection.
The operator ensures the safety of personal data and takes all possible measures to prevent access to personal data of unauthorized persons.
The User’s personal data will never, under any circumstances, be transferred to third parties, except in cases related to the implementation of current legislation.
If inaccuracies in personal data are detected, the User can update them independently by sending a notification to the Operator’s email address policy@mysite.ru marked «Updating personal data».
The period for processing personal data is unlimited. The user can withdraw their consent to the processing of personal data at any time by sending a notification to the Operator via email to the Operator’s email address policy@mysite.ru marked «Withdrawal of consent to the processing of personal data».

7. Cross-border transfer of personal data
The operator must ensure that the rights of personal data subjects are reliably protected by the foreign state to whose territory the transfer of personal data is intended to take place prior to the start of cross-border transfer of personal data.
Cross-border transfer of personal data on the territory of foreign states that do not meet the above requirements can only be carried out if the personal data subject agrees in writing to the cross-border transfer of his personal data and/or fulfills the contract to which the personal data subject is a party.

8. Final provisions
The user can get any clarifications on issues of interest related to the processing of their personal data by contacting the Operator via email policy@mysite.ru.
This document will reflect any changes to the Operator’s personal data processing policy.
The policy is valid indefinitely until it is replaced with a new version.
The current version of the Policy is freely available on the Internet at http://gredors.com.